Cansec Wireless S2SPI-HA-A ST SPIRIT1 QTR 434M/470M/868M/915M smart home IoT Solution Low Power Consumption Sub-G module

S2SPI-UA-A Sub GHz module with ST Spirit-2 chipset

868MHz

Parameter		Min	Typ	Max	Unit
Operating Voltage		1.8	-	3.6	V
Operating Temperature		-20	-	+70	℃
Current Consumption	Sleep Mode	-	-	1	uA
	Receive mode	-	8	9	mA
	Transmit Mode	-	38	40	mA
TX Power (For Carrier)		-	-	14	dBm
RX Sensitivity (For Lora Modulation)		-	-	-130	dBm
Distance		HA:110 UA:230			m

434MHz

Parameter		Min	Typ	Max	Unit
Operating Voltage		1.8	-	3.6	V
Operating Temperature		-20	-	+70	℃
Current Consumption	Sleep Mode	-	-	1	uA
	Receive mode	-	8.2	9	mA
	Transmit Mode	-	21	24	mA
TX Power (For Carrier)		-	-	14	dBm
RX Sensitivity (For Lora Modulation)		-	-	-130	dBm
Distance		HA:110 UA:230			m

S2SPI-UA-A Sub GHz module with ST Spirit-2 chipset

1. S2SPI-HA/UA/NA-A Module is designed based on S2-LP. S2-LP is a high performance ultra-low power RF transceiver, intended for RF wireless applications in the sub-1 GHz band. It is designed to operate in both the license-free ISM and SRD frequency bands at 433, 868 and 920 MHz, but can also be programmed to operate at other additional frequencies in the 430-470MHz, 860-940 MHz bands.

2. The S2-LP can be used in systems with channel spacing of 12.5/25 kHz enabling. The narrow band operations. The S2-LP shows an RF link budget higher than 140dB for long communication ranges and meets the regulatory requirements applicable in territories worldwide, including Europe, Japan, China and the USA.

Pad Number	Name	Pin Type	Description
1	SDO	Digital out	SPI slave data output
2	SDI	Digital in	SPI slave data input
3	SCLK	Digital in	SPI slave clock input
4	CSn	Digital in	SPI chip select
5	GPIO0	Digital I/O	General purpose I/O that may be configured through the SPI registers to perform various functions
6	GPIO1	Digital I/O	General purpose I/O that may be configured through the SPI registers to perform various functions
7	GPIO2	Digital I/O	General purpose I/O that may be configured through the SPI registers to perform various functions
8	GPIO3	Digital I/O	General purpose I/O that may be configured through the SPI registers to perform various functions
9	GND	Ground pin	Connect to GND
10	SDN	Digital in	Shutdown input pin. SDN should be = ‘0’ in all modes, but SHUTDOWN mode
11	GND	Ground pin	Connect to GND
12	GND	Ground pin	Connect to GND
13	VCC	Power Supply	1.8 V to 3.6 V power
14	VCC	Power Supply	1.8 V to 3.6 V power
15	GND	Ground pin	Connect to GND
16	GND	Ground pin	Connect to GND
17	GND	Ground pin	Connect to GND
18	GND	Ground pin	Connect to GND
19	GND	Ground pin	Connect to GND
20	ANT	Antenna Interface	Connect to an external Antenna
21	GND	Ground pin	Connect to GND

We are Beijing JiaAn Electronics Technology, founded in 1994; Taiwan invested.

We are the third-party partner of Texas Instruments and the supplier of Arrow Electronics;

along with over 25 years of experience in the RF industry,

we developed a team with deep technical background,

high performance and quick response timing to co-operate with our clients globally.

About 70 per cent of our clients are overseas, and 80 per cent of our clients are returning customers.

All our products require layers and layers of inspections, testing and quality control procedures before shipping;

Offering our client a trustworthy and long-lasting partnership.